LS 460 RWD V8-4.6L (1UR-FSE) (2010)
2. REMOVE FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Removal
3. REMOVE COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Removal
4. REMOVE COWL SIDE TRIM BOARD RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Removal
5. REMOVE FRONT FLOOR SILENCER PAD LH
6. REMOVE FRONT FLOOR SILENCER PAD RH
7. REMOVE REAR NO. 2 AIR DUCT
8. REMOVE REAR NO. 1 AIR DUCT
9. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)
(a) Disconnect the heated oxygen sensor connector.
(b) Remove the grommet.
(c) Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
SST : 09224-00010
10. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)
(a) Disconnect the heated oxygen sensor connector.
(b) Remove the grommet.