LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Impact Sensor: Service and Repair
Center Airbag Sensor Assembly
Components
SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY: COMPONENTS
Removal
SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTICE:
*
w/ Navigation System (for HDD):
*
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
2. REMOVE CONSOLE BOX ASSEMBLY
(a) w/ Rear Seat Entertainment System
(1) Remove the console box assembly See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Front Console Box (w/ Rear Seat Entertainment System)/Removal.
(b) w/o Rear Seat Entertainment System
(1) Remove the console box assembly See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Removal.
3. REMOVE CENTER AIRBAG SENSOR ASSEMBLY
(a) Disconnect the holder (with connectors).