LS 460 RWD V8-4.6L (1UR-FSE) (2010)
before disconnecting the cable from the negative (-) battery terminal.
Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:
*
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
2. REMOVE REAR SEAT CUSHION ASSEMBLY LH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for Power Seat)/Removal
3. REMOVE REAR SEAT CUSHION ASSEMBLY LH (for Ottoman) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for Ottoman)/Removal
4. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for Fixed Seat Type)/Removal
5. REMOVE REAR SEATBACK ASSEMBLY LH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for Power Seat)/Removal
6. REMOVE REAR SEATBACK ASSEMBLY LH (for Ottoman) See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly (for Ottoman)/Removal
7. REMOVE REAR SEATBACK ASSEMBLY LH (for Fixed Seat Type) See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly (for Fixed Seat Type)/Removal
8. REMOVE REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Removal
9. REMOVE REAR SEAT SIDE GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Removal
10. REMOVE REAR AIRBAG SENSOR LH
(a) Remove the bolt and rear airbag sensor.
(b) Disconnect the connector.
Installation
SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: INSTALLATION
1. INSTALL REAR AIRBAG SENSOR LH
(a) Check that the engine switch is off.