LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Temporarily connect the shifting rod to the connecting rod swivel with the nut.
HINT
The nut will be tightened to a torque specification during the shift lever position adjustment procedure.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INSTALL COWL TOP VENTILATOR LOUVER See: Charging System/Alternator/Service and Repair/Removal and Replacement/Installation
5. ADJUST SHIFT LEVER POSITION
(a) Adjust the shift lever position See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Adjustments/AA80E
Automatic Transmission.
6. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Inspect the switch See: Testing and Inspection/AA80E Automatic Transmission/On-Vehicle Inspection.
7. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.