lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Suspension Main Relay > < Components|Page 7346
Page 2
background image

Panel/Service and Repair/Removal and Replacement/Installation

7. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY   See: Restraint Systems/Air Bag Systems/Air Bag/Service and

Repair/Removal and Replacement/Driver Side Knee Airbag Assembly/Installation

8. INSTALL INSTRUMENT PANEL LOWER   See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and

Replacement/Front Passenger Side Knee Airbag Assembly/Installation

9. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Dashboard /

Instrument Panel/Service and Repair/Removal and Replacement/Installation

10. INSTALL INSTRUMENT SIDE PANEL RH   See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. INSTALL COWL TOP VENTILATOR LOUVER RH   See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and

Replacement/Installation

13. ADJUST VEHICLE HEIGHT

NOTICE:
If the suspension control ECU has been replaced, be sure to adjust the vehicle height.

(a) Adjust the vehicle height    See: Sensors and Switches - Steering and Suspension/Sensors and Switches - Suspension/Ride Height

Sensor/Adjustments.

14. PERFORM INITIALIZATION

(a) Perform initialization    See: Testing and Inspection/Programming and Relearning.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

15. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light    See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnosis System.

16. ADJUST HEADLIGHT ASSEMBLY

(a) Adjust the headlight    See: Lighting and Horns/Headlamp/Adjustments.

Suspension Main Relay > < Components|Page 7346