LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2032003.png)
Installation
POWER STEERING: POWER STEERING ECU: INSTALLATION
1. INSTALL POWER STEERING ECU
(a) Attach the claw and install the power steering ECU with the 4 bolts.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Connect connector C to the power steering ECU.
(c) Connect the 2 power steering ECU connectors A and B and securely lock the connectors.
2. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
(a) Install the inlet cover with the 2 clips.
3. INSTALL ENGINE ROOM SIDE COVER
(a) Install the side cover with the 4 clips.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
