Lexus Workshop Service and Repair Manuals

Turn the steering wheel to the right and left as necessary to install the 2 screws.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter    See: Steering
Column/Testing and Inspection/Programming and Relearning.

5. INSTALL COWL TOP VENTILATOR LOUVER RH   See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and

Replacement/Installation

6. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light    See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnosis System.

7. PERFORM INITIALIZATION

(a) Perform initialization    See: Testing and Inspection/Programming and Relearning.

NOTICE:
Some systems need initialization after reconnecting the cable to the negative battery terminal.