LS 460 RWD V8-4.6L (1UR-FSE) (2010)
HINT
Tighten the nut after the vehicle is stabilized.
(b) Temporarily install the front No. 1 suspension lower arm LH to the steering knuckle with the nut.
HINT
Tighten the nut after the vehicle is stabilized.
5. INSTALL FRONT DISC BRAKE DUST COVER LH See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
6. INSTALL FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front Brake
(except 6-Pot Caliper)/Installation
7. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
8. CONNECT SPEED SENSOR CONNECTOR See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
9. INSTALL POWER STEERING LINK ASSEMBLY See: Steering/Steering Gear/Service and Repair/Removal and Replacement/Steering Gear
(w/ VGRS)/Installation
10. CONNECT TIE ROD ASSEMBLY LH See: Steering/Steering Gear/Service and Repair/Removal and Replacement/Steering Gear (w/
VGRS)/Installation
11. CONNECT TIE ROD ASSEMBLY RH See: Steering/Steering Gear/Service and Repair/Removal and Replacement/Steering Gear (w/
VGRS)/Installation
12. CONNECT STEERING SLIDING YOKE WITH SHAFT SUB-ASSEMBLY See: Steering/Steering Column/Service and Repair/Removal and
Replacement/Steering Column Assembly (W/ VGRS)/Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
15. STABILIZE SUSPENSION (w/o Air Suspension) See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Front
Shock Absorber/Installation
16. STABILIZE SUSPENSION (w/ Air Suspension) See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Front
Shock Absorber (w/ Air Suspension)/Installation
17. TIGHTEN FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH
(a) Tighten the installation nut of the front No. 2 suspension lower arm assembly LH.