LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Torque : 145 Nm (1479 kgf-cm, 107 ft-lbf)
(b) Tighten the installation nut of the steering knuckle.
Torque : 145 Nm (1479 kgf-cm, 107 ft-lbf)
NOTICE:
If it is necessary to align the holes for the clips after installing the nuts, the nuts can be tightened up to 60° more.
(c) Install a new clip.
(d) Tighten the installation bolt of the shock absorber cylinder.
Torque : 108 Nm (1101 kgf-cm, 80 ft-lbf)
18. TIGHTEN FRONT NO. 1 SUSPENSION LOWER ARM ASSEMBLY LH
(a) Tighten the installation nut of the front No. 1 suspension upper arm assembly LH.
Torque : 145 Nm (1479 kgf-cm, 107 ft-lbf)
(b) Tighten the installation nut of the steering knuckle side.