LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-2173005.png)
(a) Using SST, compress the coil spring.
SST : 09727-30021
09727-00010
09727-00021
09727-00031
NOTICE:
Do not use an impact wrench. It will damage SST.
(b) Install the coil spring so that the end comes to the stepped portion of the coil spring insulator lower.
3. INSTALL REAR COIL SPRING INSULATOR UPPER LH
(a) Align the bolt of the rear suspension support and the cutout of the rear coil spring insulator, and install the rear coil spring insulator on the rear
suspension support.
(b) Align the width across flat of the piston rod end and of the rear suspension support to install the rear shock absorber.
4. INSTALL REAR SUSPENSION SUPPORT ASSEMBLY
(a) Install the suspension support assembly with the insulator upper to the shock absorber.
5. INSTALL REAR SUPPORT TO REAR SHOCK ABSORBER LH COLLAR
(a) Install the collar to the shock absorber.
6. INSTALL REAR SUPPORT TO REAR SHOCK ABSORBER LH NUT
(a) Temporarily install a new lock nut to the rear shock absorber.
