LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Tire Pressure Module: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU
(a) Install the ECU with the bolt.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the ECU connector.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
3. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Driver Side Knee Airbag Assembly/Installation
4. INSTALL INSTRUMENT PANEL LOWER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Front Passenger Side Knee Airbag Assembly/Installation
5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
6. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
7. INSTALL INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box (w/ Rear Seat Entertainment System)/Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. CHECK TIRE PRESSURE AFTER REPAIRS
(a) After repairs, confirm that the actual tire pressures are displayed in the DATA LIST See: Testing and Inspection/Scan Tool Testing and
Procedures.