LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY (w/ Antenna)
(a) Install the receiver with the nut.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the receiver connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining for standard body See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Standard Body)/Installation.
(b) Install the roof headlining for long body See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Long Body)/Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system See: Testing and Inspection/Programming and Relearning/Registration.