LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Pass the harness of the shift switch (LH (-)) through the holes of the lower steering wheel boss cover and attach the connector clamp.
(b) Connect the connector to the shift switch (RH (+)) and install a new cable tie to the switch at the location shown in the illustration to secure the
wire in place.
(c) Attach the 2 harness clamps.
2. INSTALL LOWER STEERING WHEEL BOSS COVER
(a) Attach the 4 claws to install the lower steering wheel cover and install the 2 screws.
(b) w/ Steering Heater:
Connect the steering heater connector.
(c) Install the shift switch with the 2 screws.
3. INSTALL STEERING SHAKE DAMPER
(a) Install the steering shake damper with the 2 screws.
4. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY
(a) Install the cruise control main switch with the 2 screws.
(b) Connect the connector and attach the harness clamp.
5. INSTALL STEERING PAD SWITCH ASSEMBLY WITH MODULATOR
(a) Install the steering pad switch with the 4 screws.
NOTICE:
Connect the ground cable shown in the illustration.
(b) Connect the connector.
6. INSTALL STEERING WHEEL ASSEMBLY
(a) Install the steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering
Wheel/Installation.