LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Install the engine room ECU cover with the 3 bolts.
Torque : 7.8 Nm (80 kgf-cm, 69 in-lbf)
3. INSTALL ENGINE ROOM SIDE COVER LH
4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
(a) Install the air cleaner inlet cover with the 2 clips.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSTALL COWL TOP VENTILATOR LOUVER See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
7. CHECK AUTOMATIC TRANSMISSION SYSTEM PRECAUTION
(a) After replacing the TCM, certain procedures are necessary See: Transmission Control Systems/Service Precautions/AA80E Automatic
Transmission System.
8. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.