LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1496004.png)
(g) Disconnect the lever pin from the manual valve.
(h) Remove the check ball body and spring.
7. REMOVE SPEED SENSOR NT
(a) Disconnect the sensor connector.
(b) Using a T30 ''TORX'' wrench, remove the bolt and speed sensor from the oil pump.
(c) Remove the O-ring from the speed sensor.
8. REMOVE SPEED SENSOR NC3
(a) Disconnect the sensor connector.
(b) Remove the bolt and speed sensor from the transmission case.
9. REMOVE SPEED SENSOR SP2
