LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Disconnect the connector and detach the harness clamp.
(b) Remove the 2 screws and the switch.
5. REMOVE STEERING SHAKE DAMPER
(a) Remove the 2 screws and the steering shake damper.
6. REMOVE LOWER STEERING WHEEL BOSS COVER
(a) Remove the 2 screws of the shift paddle switch.
(b) w/ Steering Heater:
Disconnect the steering heater connector.
(c) Remove the 2 screws, detach the 4 claws and remove the lower steering wheel cover.
7. REMOVE TRANSMISSION SHIFT SWITCH ASSEMBLY (RH (+)) AND (LH (-))
(a) Detach the connector clamp and 3 harness clamps.
(b) Cut the cable tie of the shift switch (RH (+)), disconnect the connector and remove the shift switch (RH (+)) and (LH (-)).
Inspection
AA80E AUTOMATIC TRANSMISSION: SHIFT PADDLE SWITCH: INSPECTION
1. INSPECT TRANSMISSION SHIFT SWITCH ASSEMBLY (RH (+))