LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1527005.png)
(d) Remove the O-ring from the transmission wire connector.
Installation
AA80F AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: INSTALLATION
1. INSTALL TRANSMISSION WIRE
(a) Coat a new O-ring with ATF and install it to the transmission wire connector.
(b) Install the transmission wire.
(c) Install the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(d) Connect the wire connector.
HINT
Push up the lever until the claw of the transmission wire connector makes a connection sound.
(e) Connect the 3 speed sensor connectors.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
