LS 460 RWD V8-4.6L (1UR-FSE) (2010)
09954-03010
09955-03040
09956-03060
NOTICE:
*
Perform this procedure after aligning the companion flange with the spline of the drive pinion.
*
Apply grease to the threads and tip of SST center bolt before use.
(b) Coat the threads of a new drive pinion nut with hypoid gear oil LSD.
(c) Use SST to hold the flange and torque the drive pinion nut.
SST : 09950-30012
09955-03040
(d) Using SST and a torque wrench, tighten the drive pinion nut while checking the starting torque of the drive pinion.
SST : 09229-55010
SST : 09330-00021
Maximum torque:
T=490 N*m {5000 kgf*cm}
NOTICE:
*
Tighten the nut with a force of 100 N*m (1020 kgf*cm) while checking the starting torque of the drive pinion.
*
Do not overtighten the nut, as the threads will become damaged.
*
Apply hypoid gear oil LSD to the threads of the nut and drive pinion.
HINT
Perform the removal while supporting the overhaul attachment.
32. INSTALL REAR DIFFERENTIAL CASE SUB-ASSEMBLY