LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(e) Lower the engine lift slowly, and remove the rear suspension member.
10. REMOVE REAR SUSPENSION MEMBER DAMPER
(a) Remove the 3 bolts, and the rear suspension member damper.
11. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION
(a) Pass SST bolts through the area shown in the illustration, and remove the mount cushion No. 1.
SST : 09316-12010
SST : 09570-24011
NOTICE:
*
When removing the mount cushion No. 1, do not allow the rear suspension member to contact SST (09316-12010).
*
Before using SST bolts, apply hypoid gear oil to their threads.
*
Be sure to combine SST properly.
*
Do not install SST bolts at an angle.
*
Make sure SST bolts are tightened equally.
12. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION
(a) Pass SST bolt through the area shown in the illustration, and remove the mount cushion No. 2.
SST : 09316-12010
SST : 09570-24011