LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1553003.png)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the transmission shift switch assembly (RH (+)).
2. INSPECT TRANSMISSION SHIFT SWITCH ASSEMBLY (LH (-))
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the transmission shift switch assembly (LH (-)).
Installation
AA80E AUTOMATIC TRANSMISSION: SHIFT PADDLE SWITCH: INSTALLATION
1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY (RH (+)) AND (LH (-))
