LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Remove the 2 clips and air cleaner inlet cover.
4. REMOVE ENGINE ROOM SIDE COVER LH
5. REMOVE ENGINE ROOM ECU COVER
NOTICE:
*
Wipe off any water on or around the engine room ECU cover.
*
Perform these procedures in a dry place away from rain, etc.
*
Do not allow water to enter the ECM through its connector areas, screw areas, etc.
(a) Remove the 3 bolts and engine room ECU cover.
6. REMOVE TCM
(a) Disconnect the 4 connectors.
(b) Remove the 2 nuts and TCM.
Installation
AA80E AUTOMATIC TRANSMISSION: TCM: INSTALLATION
1. INSTALL TCM
(a) Install the TCM with the 2 nuts.
Torque : 5.5 Nm (56 kgf-cm, 48 in-lbf)
(b) Connect the 4 connectors.
2. INSTALL ENGINE ROOM ECU COVER