LS 460 RWD V8-4.6L (1UR-FSE) (2010)
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(e) Connect the 8 connectors to the solenoid valves.
(f) Connect the oil pressure switch connector.
(g) Coat a new O-ring with ATF and install it to the ATF temperature sensor.
(h) Install the ATF temperature sensor and lock plate with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
5. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
(a) Coat a new O-ring with ATF and install it to the oil strainer.
NOTICE:
Ensure that the O-ring is not twisted or pinched.
(b) Install the oil strainer to the valve body with the 4 bolts.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
6. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
(a) Install the 3 magnets to the oil pan.