LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-3526001.png)
Power Window Switch: Testing and Inspection
Rear Power Window Switch
WINDSHIELD / WINDOW GLASS: REAR POWER WINDOW SWITCH: INSPECTION
1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
*
If the result is not as specified, replace the power window regulator switch assembly.
(b) Check that the LED illuminates.
(c) Apply battery voltage to the power window regulator switch and check that the LED illuminates.
OK:
*
If the result is not as specified, replace the power window regulator switch assembly.
