lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 13190 > < Initial Inspection and Diagnostic Overview|Page 13188
Page 3
background image

(d) Initialization    See: Programming and Relearning/Rear Door Sunshade System

NEXT -- Continue to next step.

8. REPAIR OR REPLACE

NEXT -- Continue to next step.

9. CONFIRMATION TEST

NEXT -- END

Operation Check

INTERIOR: REAR SUNSHADE SYSTEM: OPERATION CHECK

1. CHECK MANUAL OPERATION

(a) By operating the rear sunshade switch, check that the rear sunshade rises and lowers.

2. CHECK REVERSE LINKED OPERATION

(a) When the shift lever is moved to R while the rear sunshade is rising, check that the rear sunshade automatically lowers.

(b) When the shift lever is moved to P or the vehicle is driven at 15 km/h (9.3 mph) or more, check that the rear sunshade rises again.

3. CHECK KEY OFF SWITCH OPERATION

(a) When the engine switch is turned off while the rear sunshade is rising or lowering, check that the operation continues until the rear sunshade

has fully risen or fully lowered, respectively.

(b) After the engine switch is turned from on (IG) to off, check that the rear sunshade can be operated for approximately 60 seconds.

How To Proceed With Troubleshooting

INTERIOR: REAR SUNSHADE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
*

Use these procedures to troubleshoot the rear sunshade system.

*

*: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT -- Continue to next step.

3. CHECK FOR DTC (ELECTRIC POWER CONTROL SYSTEM)*

(a) Using the Techstream, check if the electric power control system is functioning normally.

Initial Inspection and Diagnostic Overview|Page 13190 > < Initial Inspection and Diagnostic Overview|Page 13188