LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Disconnect the LG junction block connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
7. CHECK HARNESS AND CONNECTOR (REAR WINDOW SHADE - REAR JUNCTION BLOCK ECU AND BODY GROUND)
(a) Disconnect the S25 shade connector.
(b) Disconnect the S61 ECU connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
8. INSPECT REAR WINDOW SHADE ASSEMBLY
(a) Remove the rear window shade assembly See: Service and Repair/Rear Sunshade Assembly/Removal.
(b) Apply battery voltage and check the operation of the window shade motor.