LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Disconnect the O2 ECU connector.
(b) Disconnect the O5 curtain connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. INSPECT REAR CURTAIN SUB-ASSEMBLY RH (REAR CURTAIN RH)
(a) Remove the rear curtain RH See: Service and Repair/Rear Door Sunshade Assembly/Removal.
(b) Apply battery voltage and check the operation of the rear curtain RH.
Standard: