LS 460 RWD V8-4.6L (1UR-FSE) (2010)
14. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH See: Headlight Cleaner Actuator Cover/Removal
15. REMOVE HEADLIGHT CLEANER HOSE
(a) Disconnect the headlight cleaner hose from the headlight washer actuator sub-assemblies.
(b) Detach the 7 clamps and remove the headlight cleaner hose.
16. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH
(a) Remove the headlight cleaner clamp as shown in the illustration.
(b) Pull down the headlight cleaner clamp B and remove it.
(c) Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.
17. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH
HINT
Use the same procedure described for the LH side.
Installation
WIPER AND WASHER: HEADLIGHT CLEANER ACTUATOR: INSTALLATION
1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH
(a) Attach the 2 claws as shown in the illustration.