LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-3603003.png)
(c) Remove the cowl top ventilator louver.
14. REMOVE WINDSHIELD WIPER LINK ASSEMBLY
(a) Disconnect the connector. Then detach the 2 clamps and remove the wire harness from the cowl top panel.
(b) Remove the 4 bolts and wiper motor and link.
HINT
The 3 bolts labeled (A) in the illustration cannot be removed from the wiper motor and link because they are integrated into the wiper
motor and link.
15. REMOVE WIPER MOTOR COVER
(a) Remove the wiper motor cover.
HINT
Tape the screwdriver tip before use.
16. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
(a) Using a screwdriver, disconnect the rod of the wiper link from the wiper motor as shown in the illustration.
HINT
Tape the screwdriver tip before use.
(b) Place matchmarks on the wiper motor and crank arm.
