LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Attach the clips to install the fender protector upper.
10. INSTALL FRONT FENDER PROTECTOR UPPER RH
HINT
Use the same procedures described for the LH side.
11. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
12. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
13. INSTALL FRONT WIPER ARM LH
(a) Stop the wiper motor at the automatic stop position.
(b) Clean the wiper arm serration with a round file or equivalent.
(c) Clean the wiper pivot serration with a wire brush.
(d) Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.
Standard measurement: