LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-3023006.png)
33. TEMPORARILY INSTALL REAR UPPER NO. 2 CONTROL ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
34. TIGHTEN REAR UPPER NO. 2 CONTROL ARM ASSEMBLY LH See: Steering and Suspension/Suspension/Control Arm/Service and
Repair/Rear Upper Arm/Installation
35. TIGHTEN REAR UPPER NO. 2 CONTROL ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
36. TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY LH See: Steering and Suspension/Suspension/Control Arm/Service
and Repair/Rear Lower Arm/Installation
37. TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
38. TEMPORARILY INSTALL TOE CONTROL LINK SUB-ASSEMBLY LH See: Steering and Suspension/Suspension/Rear Knuckle Alignment
Link/Service and Repair/Installation
39. TEMPORARILY INSTALL TOE CONTROL LINK SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
40. TIGHTEN TOE CONTROL LINK SUB-ASSEMBLY LH See: Steering and Suspension/Suspension/Rear Knuckle Alignment Link/Service and
Repair/Installation
41. TIGHTEN TOE CONTROL LINK SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
42. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY LH See: Steering and Suspension/Suspension/Control Arm/Service
and Repair/Rear Lower Arm/Installation
43. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
44. TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY LH See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Rear
Lower Arm/Installation
45. TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
46. TEMPORARILY INSTALL PNEUMATIC CYLINDER REAR WITH SHOCK ABSORBER ASSEMBLY LH See: Steering and
Suspension/Suspension/Control Arm/Service and Repair/Rear Upper Arm/Installation
47. TEMPORARILY INSTALL PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER RH
HINT: Use the same procedures described for the LH side.
48. INSTALL REAR STABILIZER LINK ASSEMBLY LH
(a) Install the stabilizer link with the nut to the No. 2 suspension arm.
