LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-1720004.png)
-
The torque value for use with SST is effective when SST is parallel to the torque wrench.
-
Tighten the bolts so that they do not interfere with the bolt holes of the mount cushions.
(h) Tighten the 2 bolts (B).
Torque: 105 Nm (1071 kgf-cm, 77 ft-lbf)
NOTE: Make sure that the rear differential mount stopper upper and lower are not shifted or tilted.
6. INSTALL REAR AXLE ASSEMBLY
(a) Install the rear axle assembly LH and RH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Rear Drive Shaft
Assembly/Installation.
