LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REPLACEMENT
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. DRAIN DIFFERENTIAL OIL See: Fluid - Differential/Service and Repair
3. REMOVE ENGINE ASSEMBLY
(a) Remove the engine assembly See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal.
4. INSTALL ENGINE ON TO ENGINE STAND See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
5. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY See: Differential Carrier/Service and Repair/Removal and Replacement/Front
Differential Carrier Assembly/Removal
6. REPLACE FRONT DIFFERENTIAL CASE OIL SEAL
(a) Set the differential carrier to an overhaul stand, as shown in the illustration.
(b) LH:
(1) Using SST, remove the oil seal LH.
SST: 09308-00010
(2) Using SST and a hammer, tap in a new oil seal LH to the differential carrier assembly.