LX 450 L6-4.5L (1FZ-FE) (1996)
Brake Caliper: Service and Repair
Rear
Removal and Installation
1. Remove union bolt and gaskets from brake caliper, then disconnect flexible hose. Use suitable container to catch brake fluid.
2. Remove caliper sliding pins, then the caliper.
3. Reverse procedure to install, Tighten caliper mounting bolt to specification.
Disassembly and Assembly
1. Using suitable screwdriver, remove cylinder boot from caliper.
2. Place cloth between piston and caliper, then use compressed air to remove piston from caliper.
3. Using suitable screwdriver, remove piston seal from caliper.
4. Remove pin boot and sliding bushing using screwdriver and suitable hammer.