LX 450 L6-4.5L (1FZ-FE) (1996)
Distributor: Testing and Inspection
DISTRIBUTOR INSPECTION
NOTICE: Cold and Hot in the following sentences express the temperature of the coils themselves. Cold is from -10°C (14°F) to 50°C (122°F)
and "Hot" is from 50°C (122°F) to 100°C (212°F).
1. Disconnect distributor connector.
2. Remove distributor cap without disconnecting high-tension cords.
3. Remove rotor.
Air Gap Inspection G1 And G2 Pickups
Air Gap Inspection NE Pickup
4. Inspect air gaps.
Using a feeler gauge. measure the gap between the signal rotor and the pickup coil projection.
Air gap: 0.2 - 0.4 mm (0.008 - 0.016 in.)
If the gap is not as specified, replace the distributor housing assembly.
Ohmmeter Connection
Reference