LX 450 L6-4.5L (1FZ-FE) (1996)
Throttle Position Sensor: Adjustments
THROTTLE POSITION SENSOR ADJUSTMENT
If necessary, adjust throttle position sensor.
-
Loosen the 2 set screws of the sensor.
-
Apply vacuum to the throttle opener.
-
Insert a 0.62 mm (0.024 in.) feeler gauge between the throttle stop screw and stop lever.
-
Connect the test probe of an ohmmeter to the terminals IDL and E2 of the sensor.
-
Gradually turn the sensor clockwise until the ohmmeter deflects. and secure it with the 2 set screws.
-
Recheck the continuity between terminals IDL and E2.