LX 450 L6-4.5L (1FZ-FE) (1996)
Transmission Mode Switch: Testing and Inspection
Pattern Select Switch 2ND Start Mode Circuit
Pattern Select Switch Circuit (2ND Start Switch) & 2ND Start Switch Indicator Light Circuit
CIRCUIT DESCRIPTION
When 2nd start mode is selected with the pattern select switch, the ECM controls the solenoid valves and the transmission starts from 2nd gear.
In D position, the transmission automatically shifts up through 3rd to O/D as usual.
In 2nd position, the transmission is held in 2nd gear.
WIRING DIAGRAM
(*) Pattern Select Switch(2nd Start Switch)
When the 2nd start switch is pushed, the switch is contacted and the 2nd mode is selected. To cancel the 2nd start, push the 2nd start switch once again.
The 2nd start is automatically cancelled out when the ignition switch is turned OFF.
Step 1
Step 2