LX 450 L6-4.5L (1FZ-FE) (1996)
a. Disconnect the connectors from the solenoid valves.
b. Remove the three solenoid valve mounting bolts.
Torque: 10 Nm (84 inch lbs.).
c. Remove the three solenoid valves.
INSTALLATION NOTE: Replace the used O-rings with new ones.
4. Remove oil strainer.
REMOVAL NOTICE: Be careful as some fluid will come out of the oil strainer.
Remove the four bolts, oil strainer and gaskets.
Torque: 10 Nm (84 inch lbs.).
Bolt length:
Bolt A: 16 mm (0.63 inch).
Bolt B: 20 mm (0.79 inch).
Bolt C: 28 mm (1.10 inch).
INSTALLATION NOTE: Replace the used gaskets with new ones.
5. Remove oil pipe. Pry up both pipe ends with a large screwdriver and remove the pipe.
INSTALLATION NOTICE: Make sure that the oil pipe or the magnet do not interfere with the oil pan.