LX 450 L6-4.5L (1FZ-FE) (1996)
/Page-1143003.png)
d. Using SST 09606-60020, remove the bearing cap and shim from the steering knuckle.
HINT:
^
Use the SST without a collar.
^
In some cases, to satisfy the standard value of preload, more than one shims are used.
e. Using SST 09606-60020, remove the knuckle arm and shim from the steering knuckle.
HINT:
^
Use the SST without a collar.
^
In some cases, to satisfy the standard value of preload, more than one shims are used.
9. Remove steering knuckle and bearing.
HINT: Mark the removed adjusting shim and bearings so as to enable reassembling them to their proper positions.
10. Remove oil seal to axle housing. Using SST 09308-00010, remove the oil seal.
