LX 450 L6-4.5L (1FZ-FE) (1996)
Shift Indicator: Diagram Information and Instructions
Relay Blocks
Relay Blocks
R/B No.2-Front Side Of Left Fender (Fig 18)
Service Hints
E 4-A, E 5-B, E 6-C, E 7-D ENGINE CONTROL MODULE
STP-GND:
7.5-14.0 Volts with the brake pedal depressed
0-1.5 Volts with the brake pedal released
TFN-GND:
0-3.0 Volts with the transfer position at N position
9.0-14.0 Volts with the transfer position at except N position
OD2-GND:
0-3.0 Volts with the O/D main SW turned ON
9.0-14.0 Volts with the O/D main SW turned OFF
OD1-GND:
9.0-14.0 Volts with the ignition SW ON
SP2+-SP2-:
Pulse generation with vehicle moving
SPD-GND:
Pulse generation with vehicle moving
IDL-GND:
0-3.0 Volts with the throttle valve fully close
9.0-14.0 Volts with the throttle valve fully open
VTA-GND:
3.5-4.5 Volts with the throttle valve fully close
2.5-3.5 Volts with the throttle valve fully open
2-GND:
7.5-14.0 Volts with the shift lever at 2 position
0-1.5 Volts with the shift lever at except 2 position
L-GND:
7.5-14.0 Volts with the shift lever at L position
0-1.5 Volts with the shift lever at except L position
R-GND:
7.5-14.0 Volts with the shift lever at R position
0-1.5 Volts with the shift lever at except R position
PWR-GND:
7.5-14.0 Volts with the pattern select SW at PWR position
0-1.5 Volts with the pattern select SW at 2nd position