LX 570 V8-5.7L (3UR-FE) (2010)
4. REMOVE RECLINING POWER SEAT SWITCH KNOB See: Service and Repair/Overhaul/Front Seat Assembly/Disassembly
5. REMOVE FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Overhaul/Front Seat Assembly/Disassembly
6. REMOVE LUMBAR SWITCH
(a) Remove the 2 screws and switch.
Installation
SEAT: LUMBAR SWITCH: INSTALLATION
HINT
*
Use the same procedures for the LH side and RH side.
*
The procedures listed below are for the LH side.
1. INSTALL LUMBAR SWITCH
(a) Install the switch with the 2 screws.
2. INSTALL FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Overhaul/Front Seat Assembly/Reassembly
3. INSTALL RECLINING POWER SEAT SWITCH KNOB See: Service and Repair/Overhaul/Front Seat Assembly/Reassembly
4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB See: Service and Repair/Overhaul/Front Seat Assembly/Reassembly
5. INSTALL FRONT SEAT ASSEMBLY LH
(a) Install the front seat assembly See: Service and Repair/Removal and Replacement/Front Seat Assembly/Installation.
6. INSTALL ENGINE ROOM SIDE COVER LH See: Grille/Service and Repair/Removal and Replacement/Installation