LX 570 V8-5.7L (3UR-FE) (2010)
3. REMOVE REAR FLEXIBLE HOSE LH
(a) Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.
(b) Disconnect the brake tube from the flexible hose with a union nut wrench (10 mm) while holding the flexible hose with a wrench.
NOTICE:
*
Do not bend or damage the brake tube.
*
Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.
(c) Remove the clip.
(d) Remove the flexible hose.
4. REMOVE REAR FLEXIBLE HOSE
(a) Disconnect each brake tube from the flexible hose with a union nut wrench (10 mm) while holding the flexible hose with a wrench.