lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3611 > < Initial Inspection and Diagnostic Overview|Page 3609
Page 150
background image

Text in Illustration

NG --  REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO AIR CONDITIONING AMPLIFIER (CANH, CANL)

OK --  REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY  See: Heating and Air Conditioning/Control Module
HVAC/Service and Repair/Air Conditioning Amplifier/Removal

19. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NETWORK GATEWAY ECU)

(a) Disconnect the E31 network gateway ECU connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG --  REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO NETWORK GATEWAY ECU (CANH, CANL)

OK --  REPLACE NETWORK GATEWAY ECU  See: Accessories and Optional Equipment/Central Control Module/Service and
Repair/Removal

20. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 2 JUNCTION CONNECTOR - NO. 3 JUNCTION CONNECTOR)

(a) Disconnect the E75 No. 3 junction connector connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Initial Inspection and Diagnostic Overview|Page 3611 > < Initial Inspection and Diagnostic Overview|Page 3609