LX 570 V8-5.7L (3UR-FE) (2010)
(a) Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.
18. REMOVE HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY
(a) Remove the 2 bolts and bracket with cylinder.
19. REMOVE CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY
(a) Remove the 2 nuts and cylinder from the bracket.
Installation
SUSPENSION CONTROL: SUSPENSION CONTROL CYLINDER: INSTALLATION
1. INSTALL CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY
(a) Install the cylinder to the bracket with the 2 nuts.
Torque : 31 Nm (316 kgf-cm, 23 ft-lbf)
2. INSTALL HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY