RX 300 FWD V6-3.0L (1MZ-FE) (1999)
8.
CHECK FRONT ENGINE MOUNT INSULATOR:
Preparation:
A.
Disconnect the Vacuum Hose from the Front Engine Mount Insulator.
B.
Using a Mityvac or similar Hand-Held Vacuum Pump apply vacuum of 80 kPa (600 mm.Hg, 25 in.Hg) and allow it to stand for 1 minute.
Check:
A.
Check that vacuum does not bleed off.
B.
Check that there is no fluid leakage caused by damage to the lower Diaphragm.