RX 300 FWD V6-3.0L (1MZ-FE) (1999)
COMPONENTS
REMOVAL
1. REMOVE THESE PARTS:
a. Cowl side trim RH
b. Front door scuff plate RH
c. No.2 under cover
d. Lower No.2 panel
e. w/CD Auto Changer: CD changer assembly
f.
Front passenger airbag assembly
2. REMOVE BLOWER UNIT
a. Remove the 3 screws and air duct.
b. Disconnect the connectors.
c. Disconnect wire harness clamp.
d. Remove the 2 nuts, 2 bolts, screw and blower unit.
INSTALLATION