RX 300 FWD V6-3.0L (1MZ-FE) (1999)
Control Assembly: Service and Repair
REMOVAL
1. REMOVE CENTER LOWER CLUSTER FINISH PANEL Refer to Instrument Panel, Service and Repair.
2. REMOVE INTEGRATION CONTROL PANEL
Remove the 4 bolts and pull out the panel, then disconnect the connector.
3. REMOVE MULTI DISPLAY
Remove the 3 screws and multi display.
4. REMOVE RADIO
Remove the 4 screws and radio.
5. REMOVE PANEL ECU
Remove the 6 screws and ECU.
6. HEATER CONTROL
Remove the 15 screws and heater control.
7. REMOVE KNOBS
8. REMOVE PLATE
INSTALLATION
Installation is the reverse order of removal