RX 300 FWD V6-3.0L (1MZ-FE) (1999)
Evaporator Case: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE AIR OUTLET SERVOMOTOR
a. Disconnect the connector.
b. Remove the 2 screws and servomotor.
2. REMOVE WIRE HARNESS
3. REMOVE BRACKET
Remove the bolt and bracket.
4. REMOVE HEATER RADIATOR
a. Remove the 2 screws and 2 plates.
b. Pull out the heater radiator.
5. REMOVE BLOWER MOTOR CONTROL RELAY
Remove the screw and blower motor control relay.