RX 300 FWD V6-3.0L (1MZ-FE) (1999)
e. Adjust the camber by pushing or pulling the lower side of the shock absorber in the direction in which the camber adjustment is required.
f.
Tighten the nuts.
Torque: 210 Nm (2,150 kgf-cm, 155 ft. lbs.)
g. Install the front wheels.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
h. Check the camber.
HINT:
-
Try to adjust the camber to the center value.
-
Adjusting value for the set bolts is 6'- 30' (0.1°-5°).
If the camber is not within the specification, using the following table, estimate for how much additional camber adjustment will be
required, and select the camber adjusting bolt.
i.
Follow the steps described above again. Between step (b) and (c), exchange 1 or 2 selected bolts.
HINT: When exchanging the 2 bolts, exchange 1 bolt for each time.
6. ADJUST TOE-IN