RX 300 FWD V6-3.0L (1MZ-FE) (1999)
1. REMOVE FUEL PUMP ASSEMBLY FROM FUEL TANK
2. REMOVE NO.2 FUEL SUCTION SUPPORT
3. REMOVE FUEL PRESSURE REGULATOR
a. Pull out the pressure regulator.
b. Remove the O-ring from the pressure regulator.
INSTALLATION
1. INSTALL FUEL PRESSURE REGULATOR
a. Install the O-ring to the pressure regulator.
HINT: Apply a light coat of gasoline to a new O-ring, and install it to the pressure regulator.
b. Connect the pressure regulator from the fuel filter.
2. INSTALL NO.2 FUEL SUCTION SUPPORT
3. INSTALL FUEL PUMP ASSEMBLY FROM FUEL TANK