RX 300 FWD V6-3.0L (1MZ-FE) (1999)
1. LH:
REMOVE FRONT AIRBAG SENSOR
a. Remove the hold-down clamp, battery and battery tray.
b. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed.
c. Remove the 2 nuts and remove the front airbag sensor.
2. RH:
REMOVE FRONT AIRBAG SENSOR
a. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed.
b. Remove the 2 nuts and remove the front airbag sensor.
Installation